Product Overview

Bunded Plastic Diesel Storage and Dispensing Tank, rotationally moulded from a premium grade of fuel resistant, Medium Density Polyethylene and supplied complete with:

• 56L/min 240V fuel pump
• 4m length, 3/4" fuel delivery hose
• Auto shut-off delivery nozzel
• 1" suction hose with check valve and 80 micron strainer
• 2" BSP lockable fill point
• 4" inspection port c/w dipstick
• LRC overfill prevention device

Options

• Electronic oil tank contents gauge
• Mechanical flowmeter
• 10 micron fuel filter

Applications

Bunded Tank suitable for the storage and dispensing of Diesel and BioDiesel grades up to B5, produced in accordance with the requirements of BS/IS EN14214 at agricultural, commercial, industrial and institutional premises.

Installation Requirements

OFTEC & BS 5410 require a level base which is 300mm greater than the maximum tank dimensions on all sides of the tank, i.e. 2690 x 2690mm. This base should have a 30 minute fire rating (eg 100mm thick concrete).
The electrical system must have a minimum current rating of 13amps. It is recommended that 15amp 1.5mm2 core cable be used. A Residual current device should be incorporated. All electrical installation work must be undertaken by a registered electrician.