Product Overview

Bunded Plastic Diesel Storage and Dispensing Tank, rotationally moulded from a premium grade of fuel resistant, Medium Density Polyethylene and supplied complete with:

• 56L/min 240V fuel pump
• Mechanical flowmeter
• 10 micron fuel filter & spare cartridge
• 4m length, 3/4" fuel delivery hose
• Multi-stage delivery nozzel with auto shut-off facility
• 1" suction hose with check valve and 80 micron strainer
• 2" lockable fill point
• 4" inspection port c/w dipstick
• Electronic oil tank contents gauge
• LRC overfill prevention device
• Bulkhead Light
• Lockable door

Options

• 110V, 12V or 24V pump
• 72L/min or 100L/min pump (240V only)
• Combined 30 micron & water filter
• Run-dry protection unit

Applications

Plastic bunded storage and dispensing tank suitable for use with Diesel (D) and BioDiesel [with a bio element not exceeding 5% concentration] fuel at agricultural, commercial, industrial and institutional installations.
Fully compliant with all relevant product requirements contained within The Control of Pollution (Oil Storage) (England) Regulations 2001, The Water Environment (Oil Storage) (Scotland) Regulations 2006 and comparable requirements throughout the United Kingdom.

Installation Requirements

OFTEC & BS 5410 require a level base which is 300mm greater than the maximum tank dimensions on all sides of the tank, i.e. 2170 x 2170mm. This base should have a 30 minute fire rating (eg 100mm thick concrete).
The electrical system must have a minimum current rating of 13amps. It is recommended that 15amp 1.5mm2 core cable be used. A Residual current device should be incorporated. All electrical installation work must be undertaken by a registered electrician.